SPEED CUT Cutting Compound

2,050.0012,600.00

40 in stock

About This Product

  • Ultra-fast cutting compound
  • Removes 1200 grit or finer sanding marks
  • Great for removing scratches, defects, acid rain and severe swirls/holograms
Clear
Compare
SKU: NC009 Category: Tags: , ,

Unlike traditional compounds that leave compounding swirls, NANOSKIN® SPEED CUT Cutting Compound leaves a deep shine with few swirl marks. By using with MICROBUFF Cutting Pad, the abrasives cut quickly to remove 1200 grit sanding scratches, acid rain, and severe swirls and holograms. A quick pass with NANOSKIN® NANO CUT Finishing Compound will completely restore the shine and prepare the paint for wax. NANOSKIN® SPEED CUT is body shop safe, paintable, and contains no fillers. This safe, VOC compliant formula can be used on all paint finishes, including scratch-resistant and conventional clear coats.

Directions:

For best results, use on clean, cool paint and out of direct sunlight.

Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.

Suggested Tools for Optimum Results:
FLEX XC 3401 VRG Dual Action Orbital Polisher

RUPES LHR 15ES Big Foot Random Orbital Polisher

RUPES LHR 21ES Big Foot Random Orbital Polisher

  1. Apply NANOSKIN® SPEED CUT Cutting Compound uniformly to MICROBUFF™ Cutting Pad.
  2. Buff at 4800 opm, working a 2’ x 2’ section.
  3. Wipe residue off using a soft, clean microfiber towel.
  4. Make your own choice for finishing:
    • Apply NANOSKIN® FORMULA 67 Professional Quick Detailer with MICROBUFF™ Polishing Pad to add a layer of wax and restore showroom gloss. (Speed 3800 opm)
    • Apply NANOSKIN® SEAL NANO Perfect Sealant with MICROBUFF™ Finishing Pad to remove gloss-hindering defects while leaving a durable layer of paint protection behind. (Speed 3800 opm)

Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer Scratches:

  1. Apply NANOSKIN® NANO CUT Finishing Compound uniformly to MICROBUFF™ Cutting Pad.
  2. Buff at 4800 opm, working a 2’ x 2’ section.
  3. Wipe residue off using a soft, clean microfiber towel.
  4. Make your own choice for finishing:
    • Apply NANOSKIN® FORMULA 67 Professional Quick Detailer with MICROBUFF™ Polishing Pad to add a layer of wax and restore showroom gloss. (Speed 3800 opm)
    • Apply NANOSKIN® SEAL NANO Perfect Sealant with MICROBUFF™ Finishing Pad to remove gloss-hindering defects while leaving a durable layer of paint protection behind. (Speed 3800 opm)

MSDS Chart for SPEED CUT Cutting Compound

Be the first to review “SPEED CUT Cutting Compound”

Your email address will not be published.

Reviews

There are no reviews yet.

General Inquiries

There are no inquiries yet.

Main Menu