FIRST CUT Polishing Compound

976.005,800.00

40 in stock

About This Product

  • The enemy of swirls
  • Safe for all paints
  • Prepares surfaces for waxing and glazing
Clear
Compare
SKU: NC007 Category: Tags: ,

Nanoskin First Cut is the first step compound to remove sanding marks, oxidation and paint defects from all automotive paints. Its unique combination of diminishing gentle abrasives, fine polishing powders, and chemical cleaning agents, deliver a low dust application. The perfect first step when followed by Nanoskin Compolish Ultra Fine Polishing compound. Nanoskin First Cut contains no silicone, no wax, and no fillers.

Directions:

Shake well. Use only on clean, cool paint and out of direct sunlight.

Hand:

  • Apply a small amount to a soft cloth and rub on the surface until the scratches are removed.
  • Wipe off residue and apply wax or glaze.

Rotary Polisher:

  • Apply a small amount to the surface.
  • Buff with a wool or foam pad at a low rpm.
  • Slightly tilt up the pad and buff from side to side to remove scratches.
  • Wipe off residue and apply wax or glaze.

DA or Orbital Polisher:

  • Apply a small amount to the surface and polish until swirls are removed.
  • Wipe off residue and apply wax or glaze.

MSDS Chart for FIRST CUT Polishing Compound

Be the first to review “FIRST CUT Polishing Compound”

Your email address will not be published.

Reviews

There are no reviews yet.

General Inquiries

There are no inquiries yet.

Main Menu